Dimensions of Steel Pipes ASME B36.10 & B36.19 suffix (S)


 
16 to 24Other Dimensions:
1/2- 2|2½- 5|6-14|16-24
NPS1618202224
OD406.04457.2508558.8609.6
 Wall Thickness
Sch 54.194.194.784.785.54
Sch 5S4.194.194.784.785.54
Sch 106.356.356.356.356.35
Sch 10S4.784.785.545.546.35
Sch 207.927.929.539.539.53
Sch 309.5311.1312.7012.7014.27
STD9.539.539.539.539.53
Sch 4012.7014.2715.09...17.48
Sch 40S9.539.539.53...9.53
Sch 6016.6619.0520.6222.2324.61
XS12.7012.7012.7012.7012.70
Sch 8021.4423.8326.1928.5830.96
Sch 80S12.7012.7012.70...12.70
Sch 10026.1929.3632.5434.9338.89
Sch 12030.9634.9338.1041.2846.02
Sch 14036.5339.6744.4547.6352.37
XXS...............
Sch 16040.4945.2450.0153.9859.54
 Wall Thickness
OD406.04457.2508558.8609.6
NPS1618202224
16 to 24Other Dimensions:
1/2- 2|2½- 5|6-14|16-24

NPS = Nominal Pipe Size O.D. = Outside Diameter
Dimensions are in millimeters unless otherwise indicated.

 

 

DIMENSIONAL TOLERANCES FOR SEAMLESS AND WELDED PIPES ASTM A530

Nominal pipe size

up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / - 0.79 mm

10 thru 18 = + 2.37 mm / - 0.79 mm | 20 thru 24 = + 3.18 mm / - 0.79 mm

Wall Thickness

All Diameters = - 12.5%

+ tolerance not specified

Length

+ 6.40 mm / - 0 mm

Weight

Weight = + 10% / - 1.5%

 

 

DIMENSIONS AND DIMENSIONAL TOLERANCES

UNITS OF MEASURE

American pipe standards use imperial and metric (SI) units for measurement. It is important not to combine the use of these units since rounding of dimensions has resulted in an incompatibility between some values.

DIMENSIONS

Standard dimensions for welded and seamless wrought steel pipe for high or low temperatures and pressures are described in ASME B36.10. Standard dimensions for welded and seamless wrought stainless steel pipe are described in ASME B36.19. The suffix "S" in the Schedule Number is used to differentiate B36.19 pipe from B36.10 pipe. ASME B36.10 includes other pipe thicknesses which are also commercially available with stainless steel material.

DIMENSIONAL TOLERANCES

The basic permissible variations, including pipe length and straightness requirements, are defined in ASTM A530, this standard being referenced by all ASTM pipe standards.